Tuttnauer 3870E Refurbished Automatic Autoclave Sterilizer, 230V

Tuttnauer 3870E 220V Refurbished Automatic Autoclave Sterilizer

The Tuttnauer 3870E autoclave is designed for the active surgery center, medical clinic, industrial lab, doctor's office, dental practice, veterinary facility, or tattoo establishment. The stainless steel construction is ideal for sterilizing liquids, media, instruments, glassware, soil or waste products.

This unit has a digital display that continuously shows temperature, pressure, and operational time. Each stage of the cycle is automatic and micro-processor controlled from water-fill, to sterilization, exhaust, and drying. The autoclave has a low water alarm to notify the end user when the reservoir needs to be refilled with water, an in-line particle filter protects the valves, and the standby heating is to keep the chamber warmed up in between cycles. The pressure and temperature gauge are combined plus an automatic low water shut off will prevent damage to the heating elements if there is insufficient water tp complete the sterilization cycle. The heat-insulated, double-locking door provides protection to the end user from accidental burns and stops the chamber from being opened during the sterilization procedure. The autoclave has a slow or quick exhaust choice, with the fast exhaust for drying solids, and the slow exhaust for preventing media and liquid blow over. A continuous pressure purge removes air pockets and ensures even sterilization, and a large capacity reservoir provides plenty of water to avoid frequent refills (with the drain located on top for simplified cleaning). The autoclave also has an automatic shut-off for saving energy, and a battery backup ensures retention of settings and controls in the event of a power failure.

This autoclave has been through our careful refurbishment process as follows:

• Thorough inspection of ALL components, cosmetics and functionality.
• Replace all worn or bad parts.
• Sand and paint the frame and chassis as needed.
• Clean reservoir tank by removing debris and particulates.
• Clean and polish chamber and reservoir. Blow out all lines.
• Replace safety mechanisms, controls, relays, condenser tube, overheat thermostat, valves, switches, filters and all other parts as needed.
• Lubricate and clean all moving parts.
• Inspect and repair all pressure and water leaks.
• Check and lube door closure. Replace door gasket.
• Test and calibrate to manufacturer's specifications.
• Repeated cycle testing for added assurance.
• Complete spore testing at various positions within the chamber.

What's In the Box?

Refurbished Tuttnauer 3870E Autoclave
Operator Manual
2 Trays
Power Cord
5 Spore Testing Strips