Tuttnauer 2340MK Refurbished Manual Autoclave, 230V

Tuttnauer 2340MK Manual 230V Refurbished Autoclave

Check Out This Great Looking Tuttnauer 2340mk Autoclave. This is a clean autoclave that was obviously well maintained. But that doesn't matter; we still put it through our detailed refurbishment process and proudly stand behind it with a our 180 day warranty. *** LOOK at the pictures.*** What you see is what you actually get! SAVE MONEY, purchase from an authorized Tuttnauer Autoclave dealer.

The Tuttnauer 2340MK Autoclave is a true workhorse within the sterilizer industry. It is specifically engineered for the high volume clinic or facility for active use, day in and day out. This unit is a great sterilization tool for any size clinic or makes a reliable backup autoclave for an existing organization. This machine generates a fast turnaround time for those working is a busy setting.

• Automatic shutoff at the end of sterilization and dry cycles.

• Front panel controls.

• Safety device to prevent premature opening while unit is pressurized.

• Front side drain valve for ease of releasing reservoir water.

• Dual safety thermostat to protect against overheating.

• Adheres to international certifications.

• 6 Gallons (23 Liters)

• Holds 3 trays

• Cycle time:
  Cold start: 12 minutes
  Warm start: 9 minutes

• Overall Size:
  Width: 20" (50.8 cm)
  Length: 21-1/2" (54.6 cm)
  Height: 14-3/8" (36.5 cm)

• Chamber Size:
  Diameter: 9" (23 cm)
  Length: 18-1/2" (47 cm)

• Tray Size:
  Width: 6-3/4" (17.1 cm)
  Length: 16-3/8" (41.6 cm)
  Height: 7/8" (2.22 cm)

• Unit Weight:
  85 lbs (38.5 kg)

• Electrical:
  230 Volts, 2200 Watts, 50/60 Hz, 10 Amps

This autoclave has been through our careful refurbishment process as follows:

• Thorough inspection of ALL components, cosmetics and functionality.
• Replace all worn or bad parts.
• Sand and paint the frame and chassis as needed.
• Clean reservoir tank by removing debris and particulates.
• Clean and polish chamber and reservoir. Blow out all lines.
• Replace safety mechanisms, controls, relays, condenser tube, overheat thermostat, valves, switches, filters and all other parts as needed.
• Lubricate and clean all moving parts.
• Inspect and repair all pressure and water leaks.
• Check and lube door closure. Replace door gasket.
• Test and calibrate to manufacturer's specifications.
• Repeated cycle testing for added assurance.
• Complete spore testing at various positions within the chamber.

Whats In the Box?

Refurbished Tuttnauer 2540MK Autoclave
Operator Manual
2 Trays
Power Cord
5 Spore Testing Strips