Working Temperature Range - 105ºC to 135ºC
Sterilization time 1-60 minutes
Drying time - 1-99 minutes
Drying Method - By vacuum pump and heater
Sterilization and Operation Modes -
1. For solids - pre-vacuum -> sterilization -> drying
2. For solids - pre-vacuum -> sterilization -> fast exhaust
3. For liquids - sterilization -> slow exhaust
4. For additional Drying - drying after mode #1 --> end
Error Displays -
1. over-heating,
2. over-pressure,
3. door improperly locked,
4. heater problem,
5. water drainage trouble, and
6. vacuum pump malfunction
SAFETY DEVICES - Pressure safety valve, Leakage breakers, Over-heat
prevention device
Safety Valve Pressure - 0.26MPa
Sterilization time 1-60 minutes
Drying time - 1-99 minutes
Drying Method - By vacuum pump and heater
Sterilization and Operation Modes -
1. For solids - pre-vacuum -> sterilization -> drying
2. For solids - pre-vacuum -> sterilization -> fast exhaust
3. For liquids - sterilization -> slow exhaust
4. For additional Drying - drying after mode #1 --> end
Error Displays -
1. over-heating,
2. over-pressure,
3. door improperly locked,
4. heater problem,
5. water drainage trouble, and
6. vacuum pump malfunction
SAFETY DEVICES - Pressure safety valve, Leakage breakers, Over-heat
prevention device
Safety Valve Pressure - 0.26MPa
Thermometer - 5.0°C - 137.0°C, resolution 0.1°C, digital
Pressure Gauge - Analog display: -0.1 to +0.4 MPa (-1 to 4 bar)
Chamber Size (Diameter x Height) - 16.5" x 31.9" (420 mm x 810 mm)
Pressure Gauge - Analog display: -0.1 to +0.4 MPa (-1 to 4 bar)
Chamber Size (Diameter x Height) - 16.5" x 31.9" (420 mm x 810 mm)
Volume - 112 Liters
Overall (W x D x H) - 27.2" x 41.3" x 54.1" (691 x 1048 x 1374 mm)
Chamber Material - Stainless Steel SUS 304
Options - Digital printer, data logger, load sensor
Power Source - 208/220/230/240V (220V, unless specified when ordering), single phase
Options - Digital printer, data logger, load sensor
Power Source - 208/220/230/240V (220V, unless specified when ordering), single phase
Net Weight - 213 Kilos