Item Number: Z-M11D-N
No longer available
Click HERE for the Midmark M11 with automatic door.
The Ritter M11D AutoClave Automatic Sterilizer, an economical option to the Ritter M11, offers easy, effective sterilization. One button starts the cycle and you must manually open the door within 30 minutes of completion to activate the dry cycle. Today, more than ever, you need products that are reliable and simple to use. The Ritter M11 couldn’t be easier and is time tested for reliability. You load it… set it… and forget it. Select your cycle and the time is set for you. Press “Start” and the Ritter M11 fills with the correct amount of water. Once the sterilization process is complete, the door opens automatically and quietly to dissipate the steam to give you fast drying time for your instruments. It’s real convenience! The Ritter M11 has easy front access for filling and draining and have controls that are easy to understand. Its unique 11" by 18" chamber gives it the distinction of the most sterilizing capacity of any standard countertop sterilizer on the market, making it perfect for larger packs and instruments. An optional printer accessory, available on both the Ritter M11, provides records of the cycle, cycle time, temperature, and pressure. The Ritter M11 has easily accessible, front fill and drain tube features so you never have to move it to maintain or drain the water. Programmable cycle features allow custom creation of different cycle parameters for special sterilization needs. Programmable buttons allow you to change the following: Time (3 to 90 minutes), Temperature (230 to 275°F), Dry Time (0 to 60 minutes), Vent (slow or fast) and two program buttons allow you to store the custom cycles. Pre-programmed sterilization cycle controls: Unwrapped (132º C or 270º F for 3 minutes), Pouched (132º C or 270º F for 5 minutes), and Packs (121º C or 250º F for 30 minutes). The display indicates cycle selected, cycle temperature and exposure time for selected cycle. During the cycle, it shows messages describing status of cycle. When the cycle enters sterilization mode and dry mode, remaining cycle time is displayed as well as temperature and pressure.