50 Liters

(0) No Reviews yet


  1. Space-saving design with lid opening upward.
  2. Programmable auto-start for initiating a cycle up to 1 week later. 
  3. Dual-sensing lid interlock prevents lid opening when chamber is pressurized or when temperature exceeds 97°C.
  4. Automatic air purging by a microprocessor prevents over-pressurization during a cycle. 
  5. One-touch lever to easily open and close chamber lid.
  6. Programmable rate of steam exhaust. Door-closure sensor provides a prompt and the cycle will not start unless the door is closed properly. 
  7. In-process display shows status and progress of sterilization cycle. 
  8. Agar sterilization mode for sterilizing agar and then automatically maintaining it at liquid temperature. 
  9. Floating sensor to monitor load temperature. 
  10. Sterilization timer is activated only when load temperature reaches set temperature. 
  11. Agar melting mode for rapidly melting agar and maintaining it at liquid temperature, or for a hot and faster start-up. 
  12. Memory backup system retains user-programmed parameters even in case of power failure. 
  13. Click HERE For Declaration of Conformity
  14. Temperature Range:  105°C to 135°C
  15. Agar warming range:  After sterilization, agar can be maintained from 45°C to 60°C (programmable) for up to 24 hours to prevent coagulation.
  16. Sterilization Timer:  1 to 300 minutes
  17. Delayed Auto-Start:  Program autoclave to start 1 to 99 hours later
  18. Cooling Fan:  Switch to turn fan on or off
  19. Air Removal Timer:  Programmable, 3 to 9 minutes after temperature has reached 97°C
  20. Steam Venting:  Selectable from: No venting and three other venting rates
  21. Temperature for Release of Lid Interlock: Programmable, 60°C to 97°C for greater safety and flexibility
  22. Sterilization Program Cycles:  1) Liquid cycle, 2) Agar (liquid with warming) cycle, and 3) Solid cycle
  23. Additional Cycles for Agar Dissolution:  Cycle for dissolving and keeping agar warm (no sterilization)
  24. Agar Dissolution Protocol:  Initially at 60°C-100°C for 1-60 min., then at 45°C-60°C for up to 24 hrs.
  25. Safety Features: Circuit breaker with GFCI, low-water power cut-off, over-temp power cutoff, over-pressure power cut-off, safety valve, sensor for improper lid closing
  26. Steam Condenser:  15-liter water tank
  27. Drain Water Bottle:  two liters
  28. Power Requirements:  120V or 220V, 50/60 Hz, single phase
  29. Power Consumption:  2.0kW, optional 3.0kW for 220V only
  30. Shipping Weight:  180 lb (82 kg)

Ratings & Reviews

No reviews available

Be the first to Write a Review