Hanshin Sterilizer 41 Liters

1. The Substantial Steam Sterilizer of Vacuum Drying 
This sterilizer is a typical S-Class which sterilizes the medical instruments economically by applying the saturated steam generated from water by heater in the chamber to sterilize and removing air from the chamber by gravity. Dry performance after sterilization was improved innovatively because it need not to open the door during dry process by adopting vacuum drying system. This product has obtained the certificate of CE mark from the authoritative notified body in Europe. 

2. Variable Cycle Programs and Self-Diagnosis Program 
Five types of cycle program that is composed of frequently using typical sterilization parameters are embedded in the controls of sterilizer. Therefore operator can select a proper cycle conveniently for sterilizing a load and change the parameters of program easily according to the sterilizing condition. In case of the liquid cycle, the innovative method, that the residual steam after sterilization would not exhaust but cool down and condense into water naturally, has been used which enables to prevent liquid from boiling up or breaking the bottle. In addition, the re drying cycle program is embedded for drying function only. The self-diagnosis program generates the warning signal, displays the error code on the control panel and aborts the executing cycle for safety automatically in case that any operating error has occurred during cycle executing. 

3. Safety 
The door would not be opened without power supplying and in case of remaining chamber pressure exceeds in the set level by door interlock system, cycle does not start unless the door is locked. The locking system allows the door to get open by turning the eccentric latch 90° with the handle, therefore it is a device of high safety and reliability. In case the chamber pressure exceeds in the set value, the safety valve exhausts the vapor from the chamber and then decreases the chamber pressure. 

Specifications

> Altitudes up to 2,000 meters.
> Temperature range of +5 ℃ to +40 ℃.
> Maximum relative humidity of 80% for temperatures up to 31℃,  decreasing linearly to 50% at 40℃.
> Main supply voltage fluctuation of ±10% of nominal.
> Installation Category (Over voltage Category) Ⅱ, Pollution Degree 2.
> Dimension: W581xD702xH485mm
> Chamber: 11.81" (300mm) Width x 11.81" (300mm) High x 17.72" Deep (450mm) 
>  capacity _40.5L
>  max. pressure;2.40 bar, min;-1.00 bar
>  max. temp;138.0C
>  Reservoir: W238 x D117 x H233, 4.2L
>  Tray: W291xD405xH44mm, 2EA
>  Air removal: Gravity
>  Operating temp: 121-135 C
>  Power: AC220V, 50/60Hz
>  Power consumption: 2,000W
>  Weight: 77Kg
>  Printer: optional
>  LED display 
>  Microprocessor control

This HS-3041SD product has obtained the certificate of CE mark from the authoritative notified body in Europe.