50 Liters Hirayama Vertical Laboratory Sterilizer

Item #: Z-AT-HA-300MD
$11,600.00

Details

  1. Hirayama Autoclave Sterilizer - Top Load Vertical Lab
  2. Space-saving design with lid opening upward. Programmable auto-start for initiating a cycle up to 1 week later. 
  3. Dual-sensing lid interlock prevents lid opening when chamber is pressurized or when temperature exceeds 97°C. Automatic air purging by a microprocessor prevents over-pressurization during a cycle. 
  4. One-touch lever to easily open and close chamber lid. Programmable rate of steam exhaust. 
  5. Door-closure sensor provides a prompt and the cycle will not start unless the door is closed properly. 
  6. In-process display shows status and progress of sterilization cycle. 
  7. Agar sterilization mode for sterilizing agar and then automatically maintaining it at liquid temperature. 
  8. Floating sensor to monitor load temperature. Sterilization timer is activated only when load temperature reaches set temperature. 
  9. Agar melting mode for rapidly melting agar and maintaining it at liquid temperature, or for a hot and faster start-up. 
  10. Memory backup system retains user-programmed parameters even in case of power failure.
  11. TEMPERATURE: Operating Range - 105ºC to 126ºC Display Range - 5ºC to 129ºC
  12. GAUGE PRESSURE: Operating Range (gauge) - 3 to 30 psi (gauge), 0.021 to 0.21MPa Maximum Allowable - 38 psi (gauge), 0.26MPa

    Drying - 1 to 120 minutes

  13. TIMER: Sterilization - 1 to 999 minutesDrying - 1 to 120 minutes

  14. DIMENSIONS: Overall (W x D x H) - 17.3" x 20.5" x 42.1" in (44 x 52 x 107 cm) Chamber (Diameter x Height) - 50 liter 11.8" x 26.4" (30 cm x 67 cm)

  15. SAFETY DEVICES - Over-pressure power cutoff, over-temperature power cutoff, low-water power cutoff,mechanical pressure relief valve, over-current detector and circuit breaker

  16. PROGRAMS 

    1. For solids with drying - Sterilization -> Manual Steam/Water Exhaust -> Drying -> Completion 

    2. For solids w/o drying - Sterilization -> Auto Steam Exhaust -> Completion

    3. For liquids - Sterilization -> Natural Cooling -> Completion

    4. For additional drying - Drying -> Completion

  17. ACCESSORIES: Stainless steel - Mesh wire baskets, buckets (pails), and round test tube rack

    Factory or field installed - Data logger

  18. POWER: Source - 120V, 50/60 Hz, single phase (220V available on request)Consumption - 2000 watts (2000 VA)

  19. SHIPPING WEIGHT - 180 lb (82 kg)



Ratings & Reviews

No reviews available

Be the first to Write a Review