Hirayama Autoclave Sterilizer - Top Load Vertical Lab
Space-saving design with lid opening upward. Programmable auto-start for initiating a cycle up to 1 week later.
Dual-sensing lid interlock prevents lid opening
when chamber is pressurized or when temperature
exceeds 97°C. Automatic air purging by a microprocessor
prevents over-pressurization during a cycle.
One-touch lever to easily open and close chamber lid. Programmable rate of steam exhaust.
Door-closure sensor provides a prompt and the cycle
will not start unless the door is closed properly.
In-process display shows status and progress of
Agar sterilization mode for sterilizing agar and then
automatically maintaining it at liquid temperature.
Floating sensor to monitor load temperature. Sterilization timer is activated only when load temperature reaches set temperature. Agar melting mode for rapidly melting agar and maintaining it at liquid temperature, or for a hot and faster start-up. Memory backup system retains user-programmed parameters even in case of power failure.
|Operating Range - 105ºC to 126ºC|
|Display Range - 5ºC to 129ºC|
|Operating Range (gauge) - 3 to 30 psi (gauge), 0.021 to 0.21MPa|
|Maximum Allowable - 38 psi (gauge), 0.26MPa|
|Sterilization - 1 to 999 minutes|
|Drying - 1 to 120 minutes|
|Overall (W x D x H) - 17.3" x 20.5" x 42.1" in (44 x 52 x 107 cm)|
|Chamber (Diameter x Height) - 50 liter 11.8" x 26.4" (30 cm x 67 cm)|
|SAFETY DEVICES - Over-pressure power cutoff, over-temperature power cutoff, low-water power cutoff,|
mechanical pressure relief valve, over-current detector and circuit breaker
|1. For solids with drying - Sterilization -> Manual Steam/Water Exhaust -> Drying -> Completion|
|2. For solids w/o drying - Sterilization -> Auto Steam Exhaust -> Completion|
|3. For liquids - Sterilization -> Natural Cooling -> Completion|
|4. For additional drying - Drying -> Completion|
|Stainless steel - Mesh wire baskets, buckets (pails), and round test tube rack|
|Factory or field installed - Data logger|
|Source - 120V, 50/60 Hz, single phase (220V available on request)|
|Consumption - 2000 watts (2000 VA)|
SHIPPING WEIGHT - 180 lb (82 kg)